Description
Agilent Technologies G7167-60005
Technical Specifications
Brand: Agilent Technologies
Series: G7167 Infinity II Autosampler
Part number: G7167-60005
System platform: Agilent Infinity II LC/UHPLC
Instrument family: G7167 series autosampler
Component category: Autosampler spare or sub-assembly
Exact sub-component: Requires confirmation from Agilent parts documentation
Compatible software: Agilent OpenLab / ChemStation / Lab Advisor depending on configuration
Functional Features
Designed for Agilent G7167 autosampler systems
Supports automated sample injection in HPLC/UHPLC workflows
Compatible with vial and microplate sample formats
Supports single-needle or dual-needle configurations depending on system build
Integrated wash and carryover reduction capabilities in supported configurations
Controlled by Agilent instrument firmware and control software
Field-replaceable component for maintenance and service
Maintains injection precision when installed correctly
Application Scenarios
Pharmaceutical development and QC release testing
Clinical sample analysis
Environmental monitoring
Food safety testing
Polymer and additive analysis
Biopharmaceutical characterization
Academic research chromatography
High-throughput screening laboratories
Performance Parameters
Platform: Agilent G7167 autosampler
Injection precision: Determined by complete autosampler configuration
Sample capacity: Depends on installed sample tray or microplate handler
Needle configuration: Single-needle or dual-needle depending on system
Wash capability: Configurable needle and seat wash in supported setups
Maximum pressure compatibility: Defined by the complete LC system configuration
Injection volume range: Defined by installed metering device and method settings
Material Composition
Precision-machined mechanical components
Chemically resistant fluid-path materials where applicable
Stainless steel or PEEK wetted parts depending on sub-assembly
Polymer structural components for sample handling mechanisms
Electrical connectors and sensor interfaces where applicable
Seals and O-rings compatible with LC solvents
Structural Features
Designed for internal installation within the autosampler
Mechanical interface matched to chassis architecture
Electrical or fluid connections depending on sub-assembly type
Compact form factor for dense instrument integration
Labeled part number for service identification
Compatible with Agilent service tools and diagnostic software
Working Principle
As a autosampler component, -60005 functions as part of the automated sample handling, fluid routing, or mechanical drive system. During operation, the autosampler positions the needle, draws a defined sample volume, switches the injection valve, and delivers the sample into the high-pressure flow path. The specific role of -60005 depends on whether it is a mechanical assembly, fluid component, sensor module, or electrical sub-assembly.
Installation Requirements
Confirm the exact component description before installation
Power down the autosampler and disconnect power before service
Allow the instrument to reach ambient temperature if it has been running
Use appropriate tools to avoid damaging adjacent assemblies
Install the component in the correct orientation and seating position
Reconnect all electrical and fluid connections securely
Run instrument diagnostics after installation
Perform an auto-referencing or initialization routine if required by Lab Advisor
Execute a leak test and injection precision check before routine use
Usage Precautions
Verify that -60005 matches the failed or replaced component
Do not install incompatible sub-assemblies without confirmation
Follow Agilent service procedures for autosampler disassembly
Avoid contaminating fluid-path components during replacement
Use only genuine Agilent parts for safety and performance
Record the replacement in the instrument maintenance log
Monitor carryover and injection precision after installation
Refer to the official service manual for detailed disassembly steps
