Foxboro PO916JS

Foxboro PO916JS

Product Introduction
The PO916JS is a critical hardware component of the 200 Series Fieldbus Modules (FBM) in the Foxboro I/A Series system. As the cornerstone of the system’s I/O architecture, it is responsible for safely and reliably interfacing field instrument analog or discrete signals into the distributed control system.

Request Quote
Category:

Description

Foxboro PO916JS

Technical Specifications

  • Hardware Code: PO916JS (used for precise firmware and termination component matching).
  • Communication Interface: Communicates with controllers via the Foxboro Module Fieldbus.
  • Power Supply: Backplane powered, nominal 24 VDC with redundant power support.
  • Installation Form: Single-width 200 Series FBM specification.

Functional Features

  • Native Compatibility: Directly mounts on 200 Series baseplates for seamless integration with I/A Series controllers.
  • Hot-Swappable Maintenance: Supports online replacement to minimize process downtime.
  • Redundancy Ready: Architecture supports redundant I/A nodes to maintain high availability during faults.
  • Integrated Diagnostics: Built-in status LEDs and health reporting functions simplify daily inspections and troubleshooting.

Application Scenarios
Widely deployed in upstream oil and gas wellhead devices, gas compression stations, refinery unit balancing, and utility systems.

Performance Parameters

  • Operating Temperature: 0°C to 60°C.
  • Weight: Approximately 0.4 kg.
  • Protection Level: Conformal-coated electronic components to adapt to industrial dust and humid environments.

Material Composition
Compact single-width enclosure with internal circuit boards treated with industrial-grade conformal coating to enhance corrosion and interference resistance.

Structural Characteristics

  • Dimensions: Standard 200 Series FBM size.
  • Termination Method: Flexible field wiring via designated Foxboro Termination Assemblies (TA).

Working Principle
Acting as both a physical and logical interface, the PO916JS acquires signals from the field TA, digitizes them, and uploads the data to the controller via the backplane fieldbus protocol. Simultaneously, it receives downstream commands from the controller and outputs them to actuators.

Installation Requirements

  • Must be installed in a clean, well-ventilated control cabinet.
  • Ensure backplane connectors are fully aligned and locked.
  • Field signal wires must be connected to the matching Termination Assembly (TA).

Precautions for Use

  • Always verify the PO916JS hardware code before replacement to prevent configuration failures due to firmware mismatch.
  • Maintain low-impedance protective grounding to enhance noise immunity.
  • Observe electrostatic discharge (ESD) precautions during maintenance.

Related products