Description
Alcatel-Lucent M10-1GB-SFP-B
Technical Specifications 8 × 10/100/1000BASE-T RJ45 copper ports; 2 × 100/1000BASE-X dual-rate SFP fiber slots; Switching capacity 20 Gbps; Forwarding rate 14.88 Mpps; Redundant DC power input 24V to 55V DC; IP30 metal housing; DIN rail or wall mounting.
Functional Features IEEE802.1Q VLAN port segmentation; 802.1p QoS traffic priority scheduling; 802.1w RSTP rapid spanning tree for network redundancy; Port link status diagnosis and fault alarm; Support Modbus TCP network monitoring; Web and CLI configuration management; Port storm suppression; Power loss alarm relay output.
Application Scenarios Power plant DCS control network; Oil and gas field industrial communication; Railway vehicle auxiliary control network; Factory automation production line; Water treatment plant remote monitoring network.
Performance Parameters Operating ambient temperature -40℃ to +75℃; Storage temperature -40℃ to +85℃; Relative humidity 5% to 95%, no condensation; Certifications UL 60950-1, CE, FCC, RoHS, DNV GL marine approval.
Material Composition Die-cast aluminum alloy metal housing; Multi-layer industrial PCB; Ethernet isolation transformers; SFP gold-plated connectors; Screw type redundant power terminals; LED status indicators.
Structural Characteristics Compact rectangular metal enclosure; Front panel with RJ45 ports, SFP slots and LED indicators; Side DIN rail clip; Wall mounting holes reserved; Internal circuit layout separated for power and signal circuits.
Working Principle DC power supplies the switching chipset. Received Ethernet frames are parsed, classified and forwarded according to MAC address table. RSTP protocol detects network link failure and automatically switches to backup fiber path. QoS module assigns priority for real-time automation data transmission.
Installation Requirements Mount on standard TS35 DIN rail or cabinet wall. Use redundant power supply for reliability. Connect SFP fiber transceivers and copper Ethernet cables. Configure VLAN, RSTP and IP address via web interface. Complete protective earthing of metal housing.
Usage Notes Use industrial grade SFP transceivers matching application distance. Check cable shielding integrity in heavy EMC interference environment. Do not open metal housing during power on. Keep ventilation gap around the switch for heat dissipation.
