Description
Panasonic MSMD082S1S
Technical Specifications
- Product type: AC permanent magnet synchronous servo motor
- Rated power: 750 W
- Rated voltage: 200V AC
- Rated speed: 3000 rpm
- Rated torque: 2.39 Nm
- Peak torque: 7.16 Nm
- Encoder: 20-bit incremental encoder
- Shaft: Keyed shaft
- Protection grade: IP65
- Insulation class: B
- Operating temperature: 0 °C to +40 °C
- Storage temperature: -20 °C to +60 °C
- Humidity: 20% to 80%, non-condensing
- Bearing: Sealed bearing
- Cooling method: Natural air cooling
Functional Features
- 20-bit high resolution incremental encoder
- High torque output at low speed range
- Low vibration and low noise operation
- IP65 protection grade
- Compact size with 750W power
- Built-in electromagnetic brake
- Quick response for position command
- Easy parameter setting with matching A5 drive
- Anti-interference circuit design
- Stable continuous operation
Application Scenarios
- Automatic conveyor positioning axis
- Cutting machine feed axis
- Packaging machine driving axis
- Electronic component handling equipment
- Small gantry automation equipment
Materials and Construction
- Housing: Aluminum alloy
- Rotor: Silicon steel sheet and permanent magnet
- Stator: Copper enamel wire winding
- Output shaft: Carbon steel with keyway
- Encoder cover: Plastic with metal shielding
- Connector: Plastic industrial plug
Structural Features
- Cylindrical aluminum housing with flange
- Rear incremental encoder assembly
- Built-in brake coil at rear section
- Front keyed output shaft
- Power and encoder connectors on side
- Internal stator and rotor assembly
Working Principle Servo drive outputs three-phase variable frequency AC to stator winding and creates rotating magnetic field. Permanent magnet rotor rotates synchronously. Incremental encoder outputs pulse signals to feed back speed and position information to servo drive. Drive compares target position and actual feedback value, adjusts current to achieve closed loop motion control. Built-in brake locks shaft when power cuts off.
Installation Requirements
- Mount motor flange on rigid flat bracket
- Use shielded servo cable for power and encoder wiring
- Maintain ambient temperature from 0 °C to +40 °C
- Leave heat dissipation space around motor
- Align coupling to reduce misalignment
- Complete motor parameter auto-tuning after wiring
- Connect protective earth wire
Precautions
- Do not apply heavy impact on shaft and encoder cover
- Do not use in environment with corrosive gas
- Avoid continuous operation above peak torque
- Keep cable away from high voltage power cable
- Do not disassemble built-in brake and encoder
- Regularly check motor surface temperature during operation
