Description
Teknic SST-PB3-VME-2
Technical Specifications
- Product type: VMEbus PROFIBUS interface card
- Bus: VMEbus
- Protocol: PROFIBUS DP
- Role: Master or slave
- Baud rate: 9.6 kbps to 12 Mbps
- Number of slaves: Up to 125 (master)
- Supply: VME 5 V
- Operating temperature: 0 °C to +55 °C
- Storage temperature: -20 °C to +70 °C
- Humidity: 5 % to 95 %, non-condensing
- Protection: IP20
- Connector: DB9 PROFIBUS
- LEDs: Module and bus status
Functional Features
- VMEbus PROFIBUS master / slave
- Auto baud rate up to 12 Mbps
- DPV1 non-cyclic messaging
- On-board PROFIBUS controller
- Front panel LEDs for bus activity
- VMEbus DMA data transfer
- Isolated PROFIBUS port
- Drivers for VxWorks / Linux
- Diagnostic counters
- Industrial reliability
Application Scenarios
- VME-based test system PROFIBUS
- Semiconductor equipment field bus
- Manufacturing line PROFIBUS integration
- Automated test stand
- Heavy industrial VME control
Materials and Construction
- PCB: FR4
- VME connector: Pin header
- PROFIBUS: DB9 connector
- Isolation: Optocoupler
- LED: Status diodes
- Bracket: VME front panel
Structural Features
- 6U VME board
- Front panel DB9 and LEDs
- VME P2 connector
- On-board PROFIBUS ASIC
- Internal isolation
- Metal front panel
Working Principle The VME host accesses on-board memory over VMEbus. The PROFIBUS controller exchanges cyclic data with slaves. Isolation separates VME logic from PROFIBUS. LEDs indicate link state.
Installation Requirements
- Insert VME slot with power off
- DB9 certified PROFIBUS cable
- 120 ohm termination
- Ground shield
- Temperature 0 °C to +55 °C
- Install VME driver
- Set station address
Precautions
- Wear ESD strap
- Termination at bus ends
- Unique station address
- Store spares in anti-static packaging
- Check cable length for baud rate
- Do not hot swap without support
