Description
Eaton XV-303-15-C02-A00-1B
Technical Specifications: Display size: 15.6 inch widescreen TFT LCD Touch type: Projected Capacitive Touch (PCT), multi-touch Resolution: 1366 × 768 pixels Backlight: LED backlight Processor: 800 MHz ARM Cortex-A9 with dedicated GPU RAM: 512MB Internal flash memory: 1GB Retentive PLC memory: 120KB Storage expansion: SD card slot Communication: Dual Ethernet ports, USB host, USB device, RS232, RS485, CAN, optional Profibus/MPI/PPI Power supply: 24VDC Front panel protection rating: IP65 Operating temperature: 0℃ to 55℃ Storage temperature: -20℃ to 70℃ Relative humidity: 10% to 90%, non-condensing Certifications: CE, cUL, cUL Class 1 Div2, ATEX Zone22, DNV GL
Functional Features: Integrated HMI visualization and CODESYS PLC runtime complying with IEC 61131-3 standard. Dual independent Ethernet ports to separate control network and field bus network for network security. Projected capacitive multi-touch, supporting multi-point gesture control, scrolling and zooming. Anti-reflection front glass reduces reflection under workshop lighting. Galileo 10 visualization software support for screen project development. Recipe management, real-time trend curve display and historical alarm data logging. Multi-level user password permission management for operation authority control. SD card slot for program backup, restore, firmware upgrade and production data export. Hardware watchdog for automatic system reset after fatal software fault. Support mainstream industrial communication protocols including Modbus TCP, Modbus RTU, CANopen, Profibus.
Application Scenarios: Large packaging production lines, extruder control stations, metallurgical auxiliary control panels, food and beverage processing main control cabinet, offshore auxiliary machinery operation panel, printing and converting equipment, large automated gantry handling systems.
Performance Parameters: PLC minimum scan cycle adjustable down to 1ms. Screen refresh response time less than 100ms. Non-volatile retentive data storage retains data for 10 years without external power supply. Capacitive touch service life exceeds 10 million touch operations.
Material Composition: Front panel: Toughened anti-reflection glass with sealing rubber gasket. Internal printed circuit board: FR4 high-temperature industrial PCB. Display module: TFT LCD with LED backlight unit. Touch layer: Projected capacitive touch sensor film. Rear housing: Flame retardant aluminum alloy metal housing. Mounting accessories: Zinc plated steel mounting clamps.
Structural Features: Panel cutout front mounting structure. Sealed front face to achieve IP65 dust and splash protection. Flat hygienic front design, easy surface cleaning. Rear housing integrates power terminal block and multiple communication connectors. LED power and fault indicator lights on rear section. Isolation layout between power circuit and signal circuit inside housing. The housing provides mechanical shielding against electromagnetic interference.
Working Principle: 24VDC power supply energizes the ARM processor, graphic processing unit and display module. Embedded Linux system runs HMI graphical visualization program and CODESYS PLC logic simultaneously. Dual Ethernet ports realize separated bidirectional data communication with upper control system and field controllers. Capacitive touch sensor captures multi-point touch gesture input and converts to digital operation commands. TFT display renders real-time process values, setpoints, trend graphs and alarm messages. SD card stores project backup, historical alarm records and production batch data. Hardware watchdog continuously monitors system running state and triggers automatic reset when system crash occurs.
Installation Requirements: Install through cabinet panel cutout. Reserve 30mm rear clearance for air circulation and heat dissipation. Tighten metal mounting clamps uniformly to evenly compress front sealing gasket. Guarantee reliable protective earth connection for cabinet and panel housing. Route power cable and communication cable in separate cable ducts. Shield all field communication cables and single-end ground the shielding layer. Avoid installation position under direct strong sunlight and heavy vibration source.
Usage Notes: Only use isolated 24VDC industrial SELV power supply. Clean front glass panel only with soft microfiber cloth and neutral detergent. Backup complete HMI and PLC project data to SD card before firmware upgrade. Cut off power supply before plugging or unplugging rear communication connectors. Do not apply strong impact or scratch on front toughened glass. Check rubber sealing gasket integrity after disassembly and reinstallation.
