Description
Eaton XV-460-57TQB-1-501
Technical Specifications: Display size:5.7 inch TFT color Touch type:4-wire resistive touch Resolution:640 × 480 CPU:ARM RISC processor RAM:512MB Flash storage:4GB Communication:Ethernet, RS232, RS485, USB host, SD card slot Power input:24VDC Front protection:IP65 Operating temperature:0℃ to 55℃ Storage temperature:-20℃ to70℃ Humidity:10%~90% non-condensing
Functional Features: Combined HMI visualization and CODESYS embedded PLC. Multi-protocol Ethernet and serial communication. Real-time trend graph and historical alarm logging. Recipe storage and batch parameter switching. Multi-level user password management. SD card for project backup and data export. Hardware watchdog function. Predefined factory configuration defined by suffix 501.
Application Scenarios: Standard automated machinery, small conveyor systems, food processing equipment, packaging machines, HVAC control panels, laboratory automation equipment.
Performance Parameters: Minimum PLC scan cycle 1ms. Screen refresh cycle 100ms. Nonvolatile data retention 10 years. Touch service life over 1 million touches.
Material Composition: Front faceplate: Reinforced flame retardant plastic with rubber seal gasket. PCB: FR4 high temperature industrial printed circuit board. Display module: TFT LCD with LED backlight. Touch layer: Resistive film touch sensor. Rear casing: ABS flame retardant plastic. Mounting clips: Zinc plated steel.
Structural Features: Panel cutout mounting structure. Sealed front panel for IP65 protection. Rear side with power terminal and multi communication ports. LED power and fault indicators. Spring steel mounting clips. Separation design between power circuit and signal circuit.
Working Principle: 24VDC power energizes embedded system. ARM processor runs HMI graphical program and PLC logic. Ethernet and serial ports communicate with external PLC and field devices. Touch signals transmit to processor after touch controller conversion. TFT screen displays process data and alarms. SD card stores backup project and historical records. Hardware watchdog monitors system running state.
Installation Requirements: Install through control cabinet panel cutout. Reserve 20mm rear clearance for heat dissipation. Tighten mounting clips evenly. Reliable protective earth connection required. Separate power wiring and signal wiring. Avoid installation at locations with heavy vibration.
Usage Notes: Use isolated 24VDC SELV power supply. Do not scratch touch screen surface with sharp objects. Backup project data before firmware upgrade. Cut power before disconnecting field cables. Clean front panel only with soft neutral cloth. Check gasket integrity after panel removal.
