Description
Eaton XVS-440-10MPI-1-10
Technical Specifications: Display size: 10 inch TFT color display Touch type: 4-wire resistive touch Resolution: 800 × 600 pixels Processor: ARM RISC CPU RAM: 512MB Flash storage: 4GB Communication: MPI, Ethernet, RS232, RS485, USB host, SD card slot Power input: 24VDC Front panel protection: IP65 Operating temperature: 0℃ to 55℃ Storage temperature: -20℃ to 70℃ Humidity: 10% to 90%, non-condensing
Functional Features: Combined HMI visualization and CODESYS embedded PLC. MPI fieldbus interface for Siemens S7 PLC communication. Large screen for multi-variable simultaneous display. Historical trend graph and alarm event recording. Mass recipe storage for multi-product batch production. Multi-level user password access control. SD card for program backup, restore and log export. Hardware watchdog function. Support Modbus, EtherNet/IP and other standard protocols.
Application Scenarios: Large packaging lines, extruder control, automated gantry systems, food processing machinery, central workshop control panels, large printing machines, material sorting systems.
Performance Parameters: Minimum PLC scan cycle 1ms. Screen refresh rate 100ms. Nonvolatile data retention 10 years. Touch service life over 1 million touches.
Material Composition: Front panel: Reinforced flame retardant plastic with rubber seal gasket. Circuit board: FR4 high temperature industrial PCB. Display: TFT LCD module with LED backlight. Touch layer: Resistive film touch sensor. Rear housing: Flame retardant ABS plastic. Mounting clips: Zinc plated steel.
Structural Features: Panel cutout mounting design. Sealed front face to achieve IP65 rating. Rear housing integrates power terminal and multiple communication ports. Power and fault LED indicators. Multiple steel mounting clamps for uniform compression of sealing gasket. Separate routing space for power and signal circuits inside housing.
Working Principle: 24VDC power supplies the embedded controller and display module. The ARM processor runs HMI graphical program and PLC logic. MPI bus realizes real-time data exchange with Siemens PLC. Touch signals transmit to processor after touch controller conversion. Field data and alarm information display on large TFT screen. SD card stores backup files and historical logs. Hardware watchdog monitors system running state continuously.
Installation Requirements: Mount through control cabinet panel cutout. Reserve 25mm rear clearance for heat dissipation. Tighten mounting clips evenly to prevent gasket distortion. Connect protective earth wire to cabinet ground. Separate power cable and signal cable routing. Avoid installation location with heavy vibration.
Usage Notes: Adopt isolated 24VDC industrial power supply. No sharp objects allowed on touch screen surface. Backup project files before firmware update. Power off before disconnecting field connectors. Clean front panel with soft cloth and neutral cleaner only. Check gasket condition after removing panel.
