Description
Emerson 1C31194G01
Technical Specifications: Power supply:24VDC. Isolation voltage:1500VAC. Operating temperature:0℃~60℃. Storage temperature:-40℃~85℃. Humidity:5%~95% non-condensing.
Functional Features: Independent overcurrent protection for each output channel. LED indicators show channel output state. Galvanic isolation between system side and field load side. Support matched I/O card hot swap. Screw terminal design for field load wiring. High density layout saves cabinet space.
Application Scenarios: Bulk solenoid valve control in chemical plant, pump and fan start-stop control, power plant auxiliary equipment relay control, paper machine actuator control, water treatment valve control.
Performance Parameters: Maximum per channel load current:1A. Output response time less than 2ms. Vibration resistance:10~150Hz,0.5g. Shock resistance:10g,11ms. MTBF:190000 hours.
Material Composition: Shell: UL94-V0 flame retardant plastic. Terminal screw: nickel-plated brass. PCB: FR4 glass epoxy substrate. Protection components soldered on PCB. Mounting clip: stainless steel.
Structural Features: 35mm DIN rail snap installation. Front panel with LED indicators and multi-row screw terminals. Upper card slot for high density digital output card. Channel number printed on shell surface. Anti-misplug positioning buckle.
Working Principle: Ovation controller sends digital output command to digital output card. The card controls the circuit on terminal base. The terminal base outputs switch signal to drive field actuators. The isolation circuit separates low voltage control circuit and high energy field load circuit.
Installation Requirements: Install on standard 35mm DIN rail. Reserve 25mm heat dissipation space. Field load cable and control signal cable must be routed separately. Terminal screw torque 0.6~0.8N·m. Cut off power before wiring work.
Precautions for Use: Do not exceed rated load current of each channel. Wear anti-static wristband when touching circuit board. Check terminal tightness regularly. Stop using the module when shell has burning marks.
