Description
Emerson 1C31234G01
Technical Specifications: Rated operating voltage: 24 VDC Isolation voltage:1500 VAC Operating temperature:0 ℃ ~60 ℃ Storage temperature:-40 ℃ ~85 ℃ Relative humidity:5% ~95% non-condensing
Functional Features: Screw type terminals for field cable termination. Built-in transient voltage suppression components. EMI filter reduces external electromagnetic interference. LED power status indicator. Reserved test points for on-site signal inspection. DIN rail quick installation structure. Anti-misplug mechanical structure. It supports hot swap of matched I/O cards.
Application Scenarios: Thermal power plant DCS control cabinets, chemical plant continuous process control, water treatment plant automatic control, metallurgical process monitoring, pulp and paper production line automation.
Performance Parameters: Terminal contact resistance less than 10 milliohm Vibration resistance:10 Hz~150 Hz,0.5g Shock resistance:10g peak,11ms MTBF:202000 hours
Material Composition: Housing: UL94-V0 flame retardant thermoplastic. Terminals: nickel-plated brass. PCB: FR4 glass epoxy substrate. Internal protection components sealed with epoxy resin. Mounting clip: stainless steel.
Structural Features: 35mm DIN rail buckle installation. Front panel with screw terminals and channel marking area. Upper card slot for plugging I/O card. Positioning buckle prevents wrong card installation. Dust-proof grooves molded on shell surface.
Working Principle: Field instrument signals enter through front screw terminals. Signals pass through built-in filter and surge protection circuit, then transmit to I/O card plugged on top socket. I/O card converts analog or digital signals into digital data and uploads data to Ovation controller. The terminal base distributes 24V DC power supply for field signal loops.
Installation Requirements: Install on standard 35mm DIN rail. Keep 20mm vertical ventilation clearance. Separate signal cable and high voltage power cable routing. Terminal screw torque 0.6~0.8 N·m. Cut off power supply before wiring work.
Precautions for Use: Do not deploy in corrosive gas environment. Wear anti-static wristband when touching circuit parts. Check terminal tightness periodically. Disconnect all field cables before removing terminal base.
