Description
HONEYWELL 51401577-100
Technical Specifications Coaxial cable interface; Built-in signal conditioning circuit; Surge protection circuit; LCN link fault detection; Rack plug-in design; Compatible with TDC3000 LCN node rack.
Functional Features Realize signal interface conversion between node board and LCN coaxial cable; Condition LCN signal waveform for long-distance transmission; Suppress lightning surge and voltage spike from coaxial cable; Detect cable break and communication link failure; Isolate node internal circuit from external cable interference; Upload LCN link fault alarm to LCN node.
Application Scenarios Refinery and chemical plant TDC3000 control room; LCN workstation and history module cabinet; LCN network physical interface connection point.
Performance Parameters Operating temperature 0℃ to 60℃; Humidity 5% to 95%, non-condensing; Stable signal transmission performance; Surge withstand capability meets industrial control requirement.
Material Composition FR-4 printed circuit board; Coaxial metal connectors; Signal conditioning components; Surge absorption elements; Flame retardant plastic housing.
Structural Features Rack plug-in module; Front panel with LCN communication status LED indicator; Coaxial signal port on housing; Rack fixing buckle; Anti-reverse positioning notch; Model and revision printed on housing.
Working Principle The module receives LCN data signal from node board, performs waveform conditioning and transmits signal to coaxial backbone cable. It receives signal from coaxial cable, filters interference and sends clean signal to node board. Surge protection components absorb high voltage spike induced on cable. Diagnostic circuit monitors link status continuously and sends fault alarm when cable break or communication interruption occurs.
Installation Requirements Insert module into designated rack slot and lock fixing buckle; Fasten coaxial connector tightly; Connect protective ground wire to cabinet ground bar; LCN coaxial cable shield uses single-point grounding; Verify LCN network communication after installation.
Precautions for Use Do not plug or unplug module under power-on state; Do not connect high voltage signal to coaxial port; Inspect coaxial connector aging regularly; Keep coaxial cable separated from high power cable.
