Description
HYBRICON PCI354-1022-38
Technical Specifications: Bus interface: Standard PCI bus Analog input: Multi-channel 16-bit analog differential input Maximum sampling rate: 100 kS/s per channel Digital I/O: Isolated digital input and digital output channels Isolation voltage: 1500V DC isolation between field channels and PCI host bus Power supply: PCI slot power supply plus optional external 24VDC field power Operating temperature range: 0℃ ~ +60℃ Storage temperature range: -40℃ ~ +85℃ Relative humidity: 5% to 90%, non-condensing Form factor: Full height PCI add-on card with aluminum shielding housing Protection grade: IP30 with metal shielding shell installed
Functional Features: High-resolution 16-bit analog differential signal acquisition for weak sensor signals. Galvanic isolation between field signal channels and industrial PC host bus. Multi-channel simultaneous sampling support for synchronous measurement. Isolated digital input to read field switch and contact status. Isolated digital output to drive external relays and indicator loads. Metal aluminum shielding housing reduces electromagnetic radiation and external noise interference. Onboard ESD, overvoltage and surge protection circuit for field signal terminals. Windows industrial driver support for custom data acquisition application development. Onboard LED indicators for power, sampling activity and fault status.
Application Scenarios: Industrial machine condition monitoring, production line data logging, laboratory test bench measurement, energy consumption monitoring system, automated test equipment, factory process signal acquisition, vibration and pressure measurement.
Performance Parameters: High measurement linearity and low signal distortion during high-speed sampling. 1500V isolation blocks transient surge and ground loop current between field and host PC. Continuous 24-hour stable data acquisition in industrial cabinet environment. Onboard signal buffer maintains data integrity during burst signal sampling. Low crosstalk between adjacent analog measurement channels.
Material Composition: PCB substrate: Multi-layer FR4 glass fiber epoxy printed circuit board. Core components: 16-bit ADC chip, digital logic controller, optocoupler isolation array, surge suppression components, PCI bridge chip. Mechanical parts: Steel PCI mounting bracket, aluminum alloy shielding housing. External connector: High density D-SUB connector with metal shielding shell.
Structural Features: Standard full height PCI add-on card layout, compatible with standard industrial PC PCI slot. Steel mounting bracket fixed at card edge, with external D-SUB signal connector. Aluminum alloy shielding shell covers the top of PCB for electromagnetic shielding. Internal circuit divided into PCI host bus interface region, digital logic region and isolated field signal region. High density D-SUB connector for all analog and digital field signal wiring. Gold plated PCI edge connector for insertion into industrial PC PCI slot.
Working Principle: After inserting HYBRICON PCI354-1022-38 into industrial PC PCI slot, the card receives power supply from PCI bus. After driver installation, host application software configures sampling rate, input range and channel parameters. Analog signals from field sensors are fed into D-SUB connector, pass through signal conditioning circuit and isolation barrier before entering ADC converter. ADC converts analog signal to digital sampling data and transfers data to industrial PC memory over PCI bus. Digital input channels read field contact status through optocoupler isolation. Digital output commands from host software activate isolated digital output channels to control external field devices. LED indicators show card power and sampling operating state.
Installation Requirements: Power off industrial PC before inserting PCI card. Remove PC chassis rear slot cover, insert PCI354-1022-38 into empty PCI slot and fasten steel bracket screw. Connect field sensor and actuator shielded cables to D-SUB connector. Install dedicated HYBRICON PCI card driver software on Windows industrial operating system. Configure sampling parameters and channel range in data acquisition configuration tool. Connect industrial PC chassis protective earth to reliable grounding point. Separate field signal cables from high power motor cables.
Usage Notes: Backup test project configuration before modifying sampling parameters. Use shielded twisted pair cable for all analog sensor wiring. Wear anti-static wristband during card installation and removal. Regularly inspect D-SUB connector tightness and LED indicator status. Do not apply voltage exceeding rated input range to analog terminals. Do not operate card outside rated temperature and humidity range. Prevent dust accumulation on PCI edge connector and D-SUB port.
