Description
VIBRO-METER RPS6U 200-582-500-013
Technical Specifications
- Product type: TSI rack power supply unit
- Input: AC110V / AC230V selectable
- Output: Multiple regulated DC rails
- Output isolation: Input to output galvanic isolation
- Fault monitoring: Over voltage, under voltage, over current detection
- Operating temperature: 0 °C to +55 °C
- Storage temperature: -20 °C to +70 °C
- Humidity: 5% to 95%, non-condensing
- Protection rating: IP20
- Installation: Eurocard rack plug-in module
- Indication: Power OK and fault LED indicators
Functional Features
- Multiple DC voltage outputs for TSI rack modules
- AC input wide range compatibility
- Galvanic isolation between AC input and DC output
- Over voltage, under voltage and over current protection
- Power status and fault LED indication
- Power fail alarm relay output
- Eurocard plug and play rack installation
- Low ripple DC output for high precision vibration measurement
- Redundant parallel operation capability
- Industrial continuous long time operation
Application Scenarios
- Steam turbine TSI monitoring rack power supply
- Gas turbine vibration supervision system
- Large compressor machinery protection rack
- Power plant rotating equipment monitoring cabinet
- Heavy industry high speed rotating machine monitoring
Materials and Construction
- Front panel: Coated metal front panel
- PCB: FR4 power circuit board with conformal coating
- Power transformer: Shielded isolation transformer
- Semiconductors: High speed rectifier and switching devices
- Heat sink: Aluminum heat sink for power components
- Connector: Gold plated eurocard edge connector
Structural Features
- Standard eurocard plug-in module form factor
- Front metal panel with status LEDs
- Rear gold finger edge connector connecting to rack backplane
- Internal EMI filter, rectifier, switching stage and output filter
- Aluminum heat sink mounted on power semiconductor devices
- Front panel locking latch for fixing inside rack slot
Working Principle AC input voltage passes EMI filter and rectification circuit. The switching power stage converts rectified DC into high frequency AC. Isolation transformer separates primary and secondary circuits. Secondary rectifier and filter produce multiple stable DC voltage rails. Monitoring circuit continuously samples output voltage. When voltage exceeds upper or lower limit or over current occurs, fault LED activates and alarm relay changes state.
Installation Requirements
- Insert module into empty TSI rack slot with rack power off
- Select correct AC input voltage jumper setting
- Connect rack protective earth
- Maintain cabinet ambient temperature 0 °C to +55 °C
- Verify all DC output voltages after power up
- Lock front panel latch after installation
- Configure redundant power parallel operation if system requires
Precautions
- Confirm AC input voltage jumper matches supply voltage
- Wear ESD wrist strap before handling module
- Do not hot swap module without redundant power configuration
- Store spare module in anti-static moisture-proof packaging
- Check output voltage periodically during maintenance
- Keep cabinet free of dust and oil contamination
- Allow sufficient airflow around power module heat sink
