Description
Bently 3500/15-07-00-00
Technical Specifications
- Upper Slot Configuration: 07 (Low Voltage DC, 20-30 Vdc)
- Lower Slot Configuration: 00 (No Power Supply)
- Agency Approvals: 00 (None)
- Input Voltage: 20 to 30 Vdc
Functional Features
- Single Power Architecture: Provides a cost-effective power solution for non-critical or secondary monitoring racks where redundancy is not required.
- Standardized Output: Delivers consistent and stable power to all standard 3500 monitoring modules.
- Integrated Protection: Built-in overload and short-circuit protection safeguards both the power supply and the downstream monitoring modules.
Application Scenarios
Ideal for secondary monitoring stations, test benches, and non-critical auxiliary machinery where a single reliable power source is sufficient.
Performance Parameters
- Operating Temperature: -30°C to +65°C
- Storage Temperature: -40°C to +85°C
- Humidity: 95% non-condensing
- Maximum Input Current: 10.0 A
Material Composition
Industrial-grade electronic components with high-reliability solder joints. The chassis is designed for excellent heat dissipation and EMI/RFI shielding.
Structural Characteristics
Occupies a single half-height slot on the left side of the rack. Includes a front-panel Power OK LED and a rear connector for the corresponding Low Voltage DC Power Input Module (PIM).
Working Principle
Converts the incoming 20-30 Vdc into isolated, regulated DC voltages. The module continuously monitors its internal health and outputs a status signal to the rack backplane.
Installation Requirements
Install in the upper left slot. Ensure adequate ventilation around the rack. Connect the appropriate Low Voltage DC PIM directly behind this module.
Usage Notes
Since this is a single power supply configuration, any failure of this module will result in a complete loss of power to the rack. Routine maintenance and input voltage monitoring are highly recommended.
