Description
Bently 9200-03-05-10-00
Technical Specifications
- Sensor Type: Two-Wire Velocity Seismic Sensor
- Part Number: 9200-03-05-10-00
- Certification: 05 (Multiple Agency Approvals)
- Cable Length: 10 feet (approx. 3 meters)
Functional Features
- High Reliability: Engineered for continuous, unattended operation in critical machinery protection applications.
- Shock Immunity: Moving-coil architecture provides superior resistance to mechanical shocks and transient impacts.
- Standardized Output: Seamlessly interfaces with Bently Nevada monitoring and protection hardware.
Application Scenarios
Applicable for structural vibration monitoring on gearboxes, extruders, and heavy-duty industrial fans.
Performance Parameters
- Sensitivity: 20 mV/mm/s (500 mV/in/s) ±5% at 100 Hz
- Zero-to-Peak Limit: 25 mm/s (1 in/s) ±5% at 100 Hz
- Operating Temperature: -29°C to +121°C
Material Composition
Heavy-duty metallic enclosure, high-temperature wire insulation, and precision-machined mounting hardware.
Structural Characteristics
Ruggedized seismic sensor design with integrated shielded cable and standard industrial mounting threads.
Working Principle
Electromagnetic induction converts the kinetic energy of structural vibration into an electrical signal proportional to velocity, without requiring external excitation power.
Installation Requirements
Ensure the mounting surface is flat and clean. Tighten the mounting stud to the manufacturer’s specified torque to guarantee optimal frequency response.
Usage Precautions
Inspect the cable sheath periodically for signs of abrasion or chemical degradation. Replace the sensor if the internal coil becomes mechanically compromised.
