Description
Bently Nevada 330130-085-12-05
Technical Specifications
- Model: 330130-085-12-05
- Series: 3300 XL Proximity Transducer System
- Cable Length: 8.5 meters (27.9 feet)
- Connector Protector and Cable Option: 12 — FluidLoc cable with connector protector
- Agency Approval: 05 — Multiple approvals (CSA, ATEX, IECEx)
- Cable Construction: 75 Ω triaxial, Fluorinated Ethylene Propylene (FEP) insulated
- Capacitance: 69.9 pF/m (21.3 pF/ft) typical
- Operating Temperature: -51°C to +177°C (-60°F to +350°F)
- Weight: 0.35 kg
- Connector Type: Gold-plated ClickLoc miniature coaxial connectors
Function Features
- FluidLoc technology prevents oil and liquid migration
- Connector protectors enhance environmental sealing
- Multiple hazardous area certifications
- Gold-plated ClickLoc connectors resist corrosion
- Complete interchangeability with 3300 XL components
- Backward compatibility with non-XL series
Application Scenarios
- Turbine supervisory instrumentation in hazardous areas
- Pipeline compression with oil-saturated environments
- Power generation equipment requiring fluid sealing
- Chemical processing with explosive atmospheres
- Hydroelectric facilities with bearing oil mist
Performance Parameters
- Extension cable capacitance is 69.9 pF/m typical
- Impedance is 75 Ω maintained over full length
- Signal attenuation is minimal
- Temperature stability across full operating range
- Calibration compatibility with 3300 XL system
Material Composition
- Cable jacket is Fluorinated Ethylene Propylene (FEP)
- FluidLoc sealant prevents liquid ingress
- Conductors are copper with controlled impedance
- Connectors are gold-plated brass or beryllium copper
Structural Characteristics
- FluidLoc cable with connector protector
- Triaxial shielded design
- ClickLoc gold-plated connectors
- Sealed construction for wet environments
- Flexible for industrial installation
Installation Requirements
- Match total cable length to Proximitor sensor calibration
- Maintain minimum 25.4 mm bend radius
- Route through dedicated conduit when possible
- Ensure connector protectors are properly seated
- Verify ClickLoc connection engagement
Operating Considerations
- Suitable for hazardous areas with multiple certifications
- FluidLoc effective against synthetic lubricants and oils
- Inspect seal integrity during preventive maintenance
- Replace if fluid migration is detected
- Keep connectors clean before mating
