Description
CONDOR HCAA60W-A Industrial Linear Power Supply
Technical Specifications
- Brand: Condor / Power One
- Model: HCAA60W-A
- Product Type: Linear DC power supply
- Product Series: HCAA-xxW-AG / HCAA linear power supply family
- Output Power: Approximately 60 W
- Output Voltage: Fixed DC output depending on configuration, typically within 5 VDC to 48 VDC range
- Output Current: Depends on selected output voltage and 60 W power class
- Input Voltage: Worldwide AC input capability including 100 VAC, 120 VAC, 220 VAC, 230 VAC, and 240 VAC
- Frequency Range: 50 Hz / 60 Hz operation depending on region
- Regulation Type: Linear regulated DC output
- Voltage Regulation: Approximately ±0.05 percent output regulation
- Output Ripple: Low output ripple suitable for sensitive electronic loads
- Protection Features: Short-circuit protection, current limiting, and optional overvoltage protection
- Overvoltage Protection: Standard on some 5 V single-output models, optional for other outputs under 48 V
- Safety Approvals: UL, CSA, and TÜV approvals depending on configuration
- EMC Marking: CE marked to the Low Voltage Directive
- Reliability: MTBF in excess of 300,000 hours according to series data
- Burn-In: 100 percent burn-in testing according to series production practice
- Warranty: Typically 2 years according to series documentation
Functional Features
- Low-Noise DC Output: Linear regulation provides clean power for sensitive circuits.
- High Regulation Accuracy: Maintains stable output voltage under input and load changes.
- Wide AC Input Range: Supports operation in multiple regional power systems.
- Short-Circuit Protection: Protects the power supply and connected equipment.
- Current Limiting: Prevents excessive output current during fault conditions.
- Optional Overvoltage Protection: Adds extra protection for critical loads.
- High MTBF Design: Supports long service life in industrial and test applications.
- Low Output Ripple: Suitable for instrumentation, analog circuits, and precision equipment.
Application Scenarios
- Industrial test and measurement equipment
- Laboratory and calibration instruments
- Analog signal processing systems
- Communication and control modules
- Medical and healthcare equipment power supply
- Semiconductor and electronic testing
- Precision automation controllers
- Research and development power systems
Performance Parameters
- Output Stability: Maintains precise DC voltage under varying load conditions.
- Line Regulation: Minimal output change during AC input variation.
- Load Regulation: Stable output when load current changes.
- Ripple Performance: Low ripple supports sensitive electronic loads.
- Protection Response: Reacts to short-circuit and overcurrent conditions.
- Thermal Stability: Designed for continuous operation within rated temperature limits.
Material Composition
- Metal Housing: Provides mechanical protection and heat dissipation.
- Power Transformer: Provides isolation and voltage conversion.
- Rectifier and Filter Circuit: Converts AC input to DC power.
- Linear Regulation Stage: Provides precise and low-noise output voltage.
- Protection Circuitry: Monitors current, voltage, and fault conditions.
- Terminal Block or Connector: Provides output connection for DC loads.
- AC Input Connector: Connects to mains power according to regional standards.
Structural Features
- Rugged Industrial Enclosure: Designed for reliable installation in equipment racks or test systems.
- Ventilation Design: Supports natural or forced-air cooling depending on installation.
- Front or Rear Terminals: Allows convenient DC output connection.
- Compact Linear Architecture: Prioritizes low noise over maximum power density.
- Shielded Internal Layout: Reduces electromagnetic interference effects.
- Serviceable Construction: Allows replacement during maintenance or system upgrades.
Working Principle
The HCAA60W-A converts AC mains voltage into a regulated DC output using linear power supply technology. The AC input is transformed, rectified, filtered, and then regulated by a linear control stage. The linear regulator continuously adjusts the output device to maintain a stable DC voltage. Because the regulation element operates in a linear mode, the output contains very low ripple and noise. When overload, short-circuit, or overvoltage conditions occur, internal protection circuits limit current or shut down the output to protect the power supply and connected equipment.
Installation Requirements
- Verify the exact output voltage and current rating before installation.
- Install in a dry, clean, and well-ventilated location.
- Provide adequate clearance for airflow and heat dissipation.
- Match the AC input voltage to the local power system.
- Use properly sized DC output cables for the rated current.
- Ground the power supply according to safety and equipment requirements.
- Verify load compatibility before connecting sensitive instruments.
- Perform output voltage and protection tests before full-load operation.
Precautions for Use
- Do not exceed the rated output voltage, current, or power.
- Do not operate the power supply beyond its specified temperature range.
- Avoid blocking ventilation openings or mounting near high-heat sources.
- Do not bypass short-circuit, overcurrent, or overvoltage protection.
- Verify AC input voltage before energizing the unit.
- Do not disassemble the power supply without manufacturer authorization.
- Replace failed units with the same model and output configuration.
- Only qualified electrical or test engineers should install or maintain the device.
- Refer to the official Condor / Power One HCAA series documentation for exact electrical ratings, wiring, and safety instructions.
