Honeywell 620-0038

Honeywell 620-0038

Product Introduction
The Honeywell 620-0038 is a Control Network Module used in Honeywell IPC-620 / ISSC 620 series industrial control systems. It provides network communication support between the processor, I/O modules, and other system components. This module is typically installed in a 620-series processor rack and is used for legacy process control, batch control, and industrial automation applications.

Request Quote
Category:

Description

Honeywell 620-0038

Technical Specifications

  • Brand: Honeywell
  • Part Number: 620-0038
  • Alternate Identification: 0528-1719
  • Product Type: Control Network Module
  • System Family: Honeywell IPC-620 / ISSC 620 PLC platform
  • Mounting: Rack-mounted module for 620-series processor rack
  • Application: Control network communication within the 620 system
  • Origin: Determined by the original equipment label

Functional Features

  • Provides control network communication within the 620 system.
  • Supports data exchange between the processor and other modules.
  • Enables coordinated operation of I/O, memory, and communication modules.
  • Used as a replacement or spare part for existing 620 installations.
  • Helps maintain communication integrity in legacy control systems.

Application Scenarios

  • Honeywell IPC-620 PLC system maintenance.
  • Replacement of failed control network modules.
  • Spare parts stocking for legacy industrial control systems.
  • Refurbishment of older Honeywell PLC racks.
  • Process control systems still using the 620 series platform.

Performance Parameters

  • Designed for integration into the Honeywell 620 processor rack.
  • Supports internal control network communication.
  • Exact network protocol, baud rate, communication topology, voltage rating, current consumption, dimensions, and environmental limits should be confirmed from the module nameplate and official Honeywell documentation.

Material Composition

  • Industrial printed circuit board
  • Communication interface circuitry
  • Connectors or backplane interface
  • Metal or plastic module housing
  • Identification label with part number and revision

Structural Features

  • Modular rack-mount form factor.
  • Designed for installation in a Honeywell 620 processor rack.
  • Connects to the system backplane or dedicated communication bus.
  • Includes status indicators depending on hardware revision.
  • Physical size and connector layout follow the 620-series module standard.

Working Principle
The 620-0038 Control Network Module participates in internal system communication within the Honeywell 620 PLC platform. It helps transfer control data, status information, and I/O-related signals between the processor and other modules. During operation, it maintains network communication so that the controller can execute logic, monitor inputs, and update outputs reliably.

Installation Requirements

  • Verify the installed 620-series rack and processor compatibility.
  • Confirm the part number and revision before installation.
  • Follow plant electrical safety and lockout/tagout procedures.
  • Install only in the correct rack slot as specified by the system configuration.
  • Avoid forcing connectors or mechanical fasteners.
  • Record the original module information before replacement.
  • Verify system communication and status after installation.

Precautions for Use

  • Do not install the module without confirming system compatibility.
  • Store spare modules in dry, clean, and anti-static conditions.
  • Avoid exposure to moisture, dust, vibration, and corrosive gases.
  • Confirm the exact slot assignment from the system configuration.
  • Replace only with approved Honeywell spare parts.
  • Check system diagnostics and communication status after replacement.

Related products