Description
Matrox Y7116-04
Technical Specifications: Interface: Camera Link Number of channels: 4 camera link input channels Data transfer: PCIe bus Image bit depth: up to 16 bit per pixel Operating system support: Windows, Linux
Functional Features: High speed parallel image acquisition. Real-time image timestamping. Trigger input for synchronized camera capture. Onboard image lookup table processing. Camera control signal output.
Application Scenarios: Electronic component inspection, semiconductor wafer inspection, printed surface defect detection, high speed product vision measurement.
Performance Parameters: Maximum bandwidth 850MB/s. Programmable trigger delay resolution 10ns.
Material Composition: FR4 high speed PCB. FPGA chip, high speed differential receiver. Metal shielding bracket. Gold plated PCIe edge connector.
Structural Features: Standard full height PCIe card form factor. Metal front bracket with camera link connectors. Internal PCIe gold finger for host computer slot connection.
Working Principle: Industrial camera outputs digital image data via Camera Link cable. Frame grabber receives serial image stream, deserializes data and reconstruct image frame. Image data transfers through PCIe bus to PC memory. External trigger signal synchronizes image capture timing.
Installation Requirements: Install into PCIe slot of industrial computer. Use matched Camera Link shielded cable. Install inside well grounded industrial PC cabinet.
Usage Notes: Power off computer before board installation. Avoid hot plug of Camera Link cable. Install official Matrox driver software.
