Description
Rolls-Royce SLIO-02
Technical Specifications
- Product type: Marine serial link I/O module
- Supply: DC24 V marine
- Digital I/O: Configurable channels
- Analog I/O: 4 to 20 mA
- Communication: Serial marine bus
- Protection: IP56
- Operating temperature: -15 °C to +55 °C
- Storage temperature: -40 °C to +70 °C
- Humidity: 95 % non-condensing
- Certification: Classification society
- Installation: Panel / bulkhead
- LEDs: Channel and module status
Functional Features
- Marine digital and analog I/O
- Serial link to main control system
- Channel galvanic isolation
- Per-channel LED indication
- Wire-break and short circuit diagnostics
- Vibration and shock resistant
- Classification society approved
- Waterproof cable glands
- Event timestamp
- Redundant communication support
Application Scenarios
- Marine propulsion control I/O
- Ship machinery monitoring
- Offshore vessel automation
- Thruster control system
- Marine engine room alarm system
Materials and Construction
- Housing: Anti-corrosion coated metal
- Seal: Silicone gasket
- PCB: FR4 conformal coated
- Connectors: Marine waterproof
- Terminals: Screw terminals
- Paint: Marine anti-corrosion
Structural Features
- Sealed marine metal housing
- Front panel LEDs
- Rear waterproof cable glands
- Internal I/O conditioning and CPU
- Vibration-hardened mounting
- Panel gasket sealed
Working Principle Field signals enter analog and digital channels. The module samples, conditions, and isolates signals before sending over serial bus to the main controller. Output commands from controller activate internal relays or analog outputs to drive field devices. Diagnostics monitor wiring and channel health.
Installation Requirements
- Bulkhead or panel mount
- Tighten waterproof glands
- Shielded marine cable
- DC24 V supply
- Grounding
- Temperature -15 °C to +55 °C
- Configure module address after power-up
- Classification society acceptance
Precautions
- Do not open housing in humid area
- Keep glands sealed
- Verify channel wiring
- Store spares in dry packaging
- Periodically test I/O channels
- Replace gasket at major overhaul
- Follow classification inspection intervals
