Description
SAACKE HMI10-M REV203
Technical Specifications:
- Display: 10 inch color TFT LCD
- Resolution: 800 × 600
- Touch Technology: Resistive touch screen
- Power Supply: DC 24 V
- Power Consumption: Approx 25 W
- Communication Ports: Ethernet, RS232, RS485, USB
- Operating Temperature: -10 °C to +55 °C
- Storage Temperature: -20 °C to +60 °C
- Front Panel Protection: IP65
- Mounting: Panel cutout installation
- Weight: 4.5 kg
Function Features:
- Real-time display of burner temperature, pressure, fuel flow and oxygen content
- Touch operation for burner start, stop and combustion parameter adjustment
- Multi-level user permission management for parameter modification protection
- Alarm pop-up display with fault code and troubleshooting guidance
- Historical trend curve recording for combustion process variables
- Event log storage for burner start-stop and alarm events
- Native communication with SAACKE DDCC and GVU burner controllers
- Support parameter backup and restore via USB storage device
- Adapt to marine and industrial boiler combustion control logic
Application Scenarios:
- Marine boiler burner local operation and monitoring
- Industrial steam boiler combustion control system
- Thermal oil furnace burner control panel
- Waste heat boiler combustion safety monitoring
- Petrochemical plant auxiliary burner control system
Material Composition:
- Front Bezel: Stainless steel reinforced panel
- Display Window: Scratch resistant transparent protective cover
- Touch Layer: Resistive touch glass and film assembly
- Main PCB: FR4 fiberglass multilayer circuit board
- Rear Housing: Reinforced metal enclosure
- Connectors: Metal RJ45, USB and screw terminal connectors
- Sealing Parts: Rubber sealing gasket for IP65 front protection
Structural Features:
- Rectangular panel mount design for boiler control cabinet cutout
- Rubber gasket installed between front bezel and cabinet panel
- Rear metal housing contains communication ports and power terminals
- Internal metal shielding reduces electromagnetic interference from burner ignition circuit
- Rear mounting clips for fastening panel into cabinet
- Front panel printed with SAACKE logo and model marking
Working Principle: HMI10-M REV203 communicates with SAACKE combustion controller via serial bus or Ethernet. It reads real-time combustion data and renders graphical display on TFT screen. Touch sensor captures operator touch input and transmits operation commands to combustion controller. Alarm events are stored in internal memory. Historical data and configuration parameters can be exported to USB flash drive. It supports parameter threshold setting for fuel pressure, air pressure and flame monitoring.
Installation Requirements:
- Cut cabinet panel according to official cutout dimension drawing
- Insert panel from cabinet front and fasten rear mounting clips
- Use shielded twisted pair cable for serial communication wiring
- Use shielded Ethernet cable for network connection
- Connect DC24V power supply and protective earth
- Maintain ambient temperature within -10 °C to +55 °C
- Avoid installation position near burner ignition high voltage cables
Usage Notes:
- Load SAACKE burner configuration project before commissioning
- Verify communication parameter matching between HMI and combustion controller
- Clean touch screen with soft cloth, avoid corrosive cleaning liquid
- Check front sealing gasket integrity regularly to prevent water and dust ingress
- Backup burner parameters to USB before firmware upgrade
- Disconnect power supply before opening rear housing cover
