Description
Vibro-Meter VM600 ABE040
Technical Specifications: Rack type: 6U Eurocard rack Available slots: Up to 12 front processing card slots, 2 power supply slots Material: High strength aluminum alloy chassis Backplane: Multi-layer signal and power distribution backplane Power input: Support dual redundant power module RPS6U Operating temperature: 0℃ to +60℃ Storage temperature: -20℃ to +70℃ Relative humidity: 5% to 95%, non-condensing Protection class: IP20 when installed inside cabinet Certifications: CE, cCSAus, IEC 61010-1
Functional Features: Mechanical housing and support for all VM600 front and rear plug-in modules. Integrated backplane to distribute DC power and high speed internal communication bus. Support dual redundant power supply installation for uninterrupted rack operation. Backplane provides signal interconnection between front processing cards and rear I/O cards. Aluminum frame provides EMC shielding for internal modules. Support module hot swap maintenance without full rack shutdown. Built-in power check relay for power supply fault monitoring.
Application Scenarios: Power plant turbine control cabinet, petrochemical compressor machinery protection cabinet, offshore platform rotating equipment monitoring system, large generator TSI cabinet, industrial heavy machinery condition monitoring cabinet.
Performance Parameters: High mechanical rigidity to resist cabinet vibration and mechanical shock. Low impedance backplane power distribution to reduce voltage drop. Excellent EMC shielding performance for industrial electromagnetic environment. Long service life under continuous 24/7 operation.
Material Composition: Extruded aluminum alloy frame and panel. Multi-layer FR4 backplane printed circuit board. Gold plated backplane connectors. Steel mounting brackets for cabinet installation. Flame retardant plastic insulation components.
Structural Features: 19-inch standard rack mount 6U chassis. Front side slots for processing, CPU and relay modules. Rear side slots for I/O terminal interface cards. Internal backplane mounted at rear of chassis. Front panel card extraction handles for each module. Ventilation gaps for natural convection heat dissipation. Mounting holes for installation inside industrial control cabinet.
Working Principle: DC power from redundant RPS6U power modules connects to rack backplane. Backplane distributes regulated 24VDC power to every plug-in module slot. High speed digital bus traces on backplane realize data communication between CPU module, protection cards and monitoring cards. Front processing cards communicate with rear IOC terminal cards through dedicated backplane connectors. Aluminum chassis connects to protective earth to provide EMC shielding for all internal electronics. All modules share the same rack time synchronization signal from CPUM module via backplane bus.
Installation Requirements: Mount ABE040 rack onto 19-inch standard cabinet rail. Use specified torque for mounting screws. Route power cables and signal cables separately. Ensure sufficient cabinet ventilation around rack. Complete protective earth bonding between rack chassis and cabinet earth bar. Install dual independent power sources when redundant power configuration is required.
Usage Notes: Do not operate rack outside rated temperature and humidity range. Keep cabinet internal free of dust and condensation. Verify backplane connector condition before inserting new modules. Do not use incompatible third-party modules inside ABE040 rack. Check rack earth connection integrity during periodic maintenance.
