Vibro-Meter VM600 IOCN 200-566-000-113

Vibro-Meter VM600 IOCN 200-566-000-113

Product Overview
The VM600 IOCN is a communication and input/output interface card for the Vibro-Meter VM600 Machinery Protection System. It works together with the VM600 CPUM processor card to provide system control, data communication and external interface functions. The IOCN enables Ethernet-based communication with VM600 MPSx software and supports industrial protocols such as Modbus TCP and PROFINET. The part number 200-566-000-113 identifies a specific IOCN hardware revision.

Request Quote
Category:

Description

Vibro-Meter VM600 IOCN 200-566-000-113

Technical Specifications

  • Brand: Vibro-Meter, part of Meggitt Sensing Systems
  • Model: IOCN
  • Part number: 200-566-000-113
  • Module type: Communication and I/O interface card
  • System platform: VM600 Machinery Protection System
  • Associated card: VM600 CPUM processor card
  • Primary Ethernet: RJ45 connector for VM600 MPSx software, Modbus TCP and/or PROFINET
  • Secondary Ethernet: RJ45 connector for redundant Modbus TCP communication
  • Primary serial port: 6P6C connector for direct connection to VM600 MPSx software
  • Serial network ports: Two pairs of 6P6C connectors for RS-485 multi-drop network configuration
  • Mounting: Rear slot of VM600 ABE04x rack, installed behind the CPUM card
  • Power supply: Supplied by rack backplane
  • Software: MPSx, VibroSight and related configuration tools

Functional Features

  • Provides communication interface for the CPUM processor card.
  • Supports Ethernet communication with MPSx software.
  • Supports Modbus TCP communication with DCS, PLC and SCADA systems.
  • Supports PROFINET communication depending on configuration.
  • Provides redundant Ethernet communication through a secondary Ethernet port.
  • Supports serial communication for direct configuration and diagnostics.
  • Supports RS-485 multi-drop networking for multiple racks.
  • Enables remote monitoring, configuration and data acquisition.
  • Integrates machinery protection data with plant control systems.
  • Supports system diagnostics and communication status monitoring.

Application Scenarios

  • rack system communication gateway.
  • Integration of machinery protection systems with DCS platforms.
  • Modbus TCP data exchange with process control systems.
  • PROFINET-based industrial network integration.
  • Redundant communication for critical protection systems.
  • Multi-rack system networking.
  • Remote configuration and monitoring of racks.
  • Power plant and petrochemical machinery monitoring networks.

Performance Parameters

  • Communication interface card for CPUM.
  • Dual Ethernet ports for primary and redundant communication.
  • Serial ports for direct configuration and RS-485 networking.
  • Supports Modbus TCP and PROFINET protocols.
  • Supports remote software access through MPSx.
  • Designed for continuous industrial communication.
  • Exact data rate, protocol version, IP rating, operating temperature, power consumption and firmware capabilities must be confirmed from the official Vibro-Meter IOCN documentation and nameplate.

Material Composition

  • Industrial printed circuit board.
  • Ethernet PHY and MAC circuits.
  • Serial communication interface circuits.
  • RS-485 transceiver circuits.
  • Communication processor interface circuits.
  • Backplane interface circuits.
  • RJ45 and serial connector interfaces.
  • Status LED indicators.
  • Protective metal front panel and card frame.

Structural Features

  • Single-width rack card.
  • Installed in the rear slot behind the CPUM card.
  • Primary RJ45 Ethernet connector.
  • Secondary RJ45 Ethernet connector for redundancy.
  • Primary serial connector for direct software connection.
  • RS-485 network connectors for multi-drop communication.
  • Status LEDs for communication and system status.
  • Designed for 19-inch ABE04x racks.

Working Principle
The IOCN connects to the CPUM through the rack backplane and provides external communication interfaces. It exchanges machinery protection data, alarm information and configuration parameters between the system and external networks. Ethernet ports support communication with MPSx software and industrial protocols. Serial ports support direct configuration and RS-485 multi-rack networking. The card maintains communication integrity and reports status to the CPUM for system diagnostics.

Installation Requirements

  • Install the IOCN in the rear slot behind the CPUM card.
  • Verify compatibility with the installed CPUM hardware and firmware.
  • Use approved Ethernet cables for primary and redundant communication.
  • Configure IP addresses and protocol parameters through MPSx.
  • Ground communication shields according to installation requirements.
  • Separate communication cables from high-voltage power cables.
  • Verify network connectivity before commissioning.
  • Confirm that the IOCN revision matches the system configuration.

Precautions for Use

  • Only qualified personnel should configure or service the IOCN card.
  • Do not disconnect communication links during critical protection operation.
  • Verify redundant communication paths before relying on redundancy.
  • Keep Ethernet and serial connectors clean and properly seated.
  • Do not modify network settings without authorization.
  • Back up system configuration before firmware updates.
  • Investigate communication faults before restarting affected systems.
  • Refer to the official Vibro-Meter IOCN manual for exact specifications.

Related products