Description
Bently 3300/03-02-01
Technical Specifications
- Sensor Type: 3300 XL 8mm Proximity Probe
- System Length: 1.0 meter (3.3 feet)
- Agency Approval: 01 (Specific Regional/Certification)
Functional Features
- Certified Safety: Meets specific regional safety and hazardous area standards.
- High Resolution: Provides precise measurement of shaft relative vibration and axial position.
- System Interchangeability: Fully interchangeable with standard 3300 XL 8mm probes and Proximitor transducers.
Application Scenarios
Deployed in facilities requiring regionally certified machinery protection components.
Performance Parameters
- Sensitivity: 7.87 V/mm (200 mV/mil) ±5%
- Linear Range: 2.0 mm (80 mils)
- Frequency Response: DC to 10 kHz
- Operating Temperature: -51°C to +177°C
Material Composition
Stainless steel housing, high-temperature PEEK sensing tip, and specialized shielded coaxial cable.
Structural Characteristics
Standard 8mm diameter cylindrical body with M10x1 mounting threads and an integrated 1.0-meter cable assembly.
Working Principle
Generates a high-frequency electromagnetic field at the probe tip, translating the physical gap between the probe tip and the rotating shaft into a linearized electrical signal.
Installation Requirements
Thread the probe into the bearing housing using the specified torque. Ensure the smooth section passes cleanly through the housing without binding.
Usage Precautions
Clean the mating threads and connector with an appropriate solvent before assembly. Apply thread sealant to prevent oil leakage into the housing.
