Description
Eaton XVS-450-57MPI-1-10
Technical Specifications: Display size: 5.7 inch TFT color display Touch type: 4-wire resistive touch screen Resolution: 640 × 480 pixels Processor: ARM RISC CPU RAM: 512MB Flash storage: 4GB Communication: MPI, RS232, RS485, Ethernet, USB host, SD card slot Power supply: 24VDC Front panel protection rating: IP65 Operating ambient temperature: 0℃ to 55℃ Storage temperature: -20℃ to 70℃ Relative humidity: 10% to 90%, non-condensing Certifications: CE, cUL
Functional Features: Integrated HMI visualization and CODESYS PLC runtime. MPI bus communication for seamless data exchange with Siemens S7 controllers. Real-time data trend recording and historical alarm logging. Recipe management function for batch production parameter switching. Password multi-level user access management. Screen brightness adjustable by software. SD card support for program backup, restore and data export. Comprehensive system self-diagnosis for hardware and communication faults. Support Modbus RTU/TCP, EtherNet/IP and other mainstream industrial protocols.
Application Scenarios: Packaging machinery, textile production lines, material handling systems, small processing machines, water treatment control panels, printing equipment, factory automation assembly stations.
Performance Parameters: Screen refresh cycle minimum 100ms. PLC logic execution cycle adjustable down to 1ms. Data retention time of non-volatile memory reaches 10 years without power supply. Touch screen operation life greater than 1 million touches.
Material Composition: Front faceplate: Reinforced polyester plastic with IP65 sealing gasket. Internal printed circuit board: FR4 industrial high temperature resistant PCB. Display module: TFT LCD with LED backlight. Touch layer: Resistive film touch sensor. Rear housing: Flame retardant ABS plastic. Metal mounting clips: Zinc plated steel.
Structural Features: Panel cutout mounting structure. Sealed front panel design to block dust and splashing liquid. Rear side with terminal block and multiple communication connectors. LED power and fault indicator lights on rear housing. Removable mounting clamps for fast installation inside control cabinet. Internal separation layout for power circuit and signal circuit.
Working Principle: 24VDC power supplies the embedded processor and display module. The processor runs HMI visualization program and CODESYS PLC logic simultaneously. MPI bus interface establishes bidirectional communication with Siemens PLC. Touch input signals are captured by resistive touch controller. Process data from field controllers displays on TFT screen. User touch operation sends command signals to internal PLC or external controller. Onboard storage records alarm events and production data continuously.
Installation Requirements: Install through panel cutout inside industrial control cabinet. Reserve 20mm clearance at rear side for heat dissipation. Use original mounting clips to fix the panel evenly. Seal gasket must be fully seated to maintain IP65 front protection. Route power cable and communication cable in separate cable channels. Connect protective earth wire to cabinet ground terminal. Avoid installation at locations with direct strong sunlight exposure.
Usage Notes: Only use 24VDC isolated industrial power supply. Do not use sharp hard objects to press touch screen surface. Complete program backup to SD card before firmware upgrade. Shut down power before disconnecting communication connectors. Wipe front panel only with soft damp cloth without strong solvent cleaner. Check gasket integrity after panel disassembly and reinstallation.
