Description
HONEYWELL 51304650-100
Technical Specifications Multi-conductor flat ribbon cable; Shielded structure; Custom length for rack internal wiring; Dedicated female and male connectors at both ends; Industrial grade insulation material; Designed for Series A I/O module and FTA connection.
Functional Features Transmit multi-channel parallel signals between I/O module and FTA terminal base; Shield layer reduces electromagnetic interference on signal transmission; Maintain stable signal quality for analog and discrete signals; Pre-assembled connectors ensure fast and reliable installation; Prevent signal cross-talk between different signal channels.
Application Scenarios Experion PKS DCS I/O cabinets; Internal wiring between Series A I/O card and FTA terminal assembly; Marshalling cabinet signal interconnection.
Performance Parameters Operating temperature range 0℃ to 60℃; Relative humidity 5% to 95%, non-condensing; Low signal crosstalk; Stable connector contact performance under cabinet vibration.
Material Composition Copper conductor; PVC flame retardant insulation material; Aluminum foil shielding layer; Plastic molded connector housing; Gold-plated connector pins.
Structural Features Flat multi-conductor ribbon cable; Molded connectors at both cable ends; Strain relief structure at connector root; Model part number printed on cable label; Predefined pin assignment matching I/O and FTA pin definition.
Working Principle Each conductor inside ribbon cable carries individual channel signal between I/O module and FTA terminal base. Shield layer of ribbon cable connects to cabinet protective ground to suppress electromagnetic noise. Parallel multi-wire structure transmits multi-channel signals simultaneously with controlled crosstalk. Molded connectors ensure accurate pin alignment and reliable electrical contact.
Installation Requirements Route cable inside cabinet with proper bending radius, avoid sharp bending; Insert connectors fully and lock connector latches; Fix cable with cable ties to prevent vibration pulling; Keep ribbon cable separated from high-current power cable; Verify pin assignment before power on.
Precautions for Use Do not pull cable by force during installation; Avoid sharp object scratching cable insulation; Do not exceed minimum bending radius; Inspect connector pins for bending or corrosion during maintenance; Replace whole cable assembly if insulation damage occurs.
