Description
IBA AG IBAFOB-4I-DEXP, 4X
Technical Specifications
Brand: IBA AG
Product family: ibaFOB fiber-optic interface cards
Model: ibaFOB-4i-Dexp
Channel configuration: 4 fiber-optic input channels
Transmission medium: Optical fiber
Data direction: Input from iba field hardware to host acquisition system
Host interface: PCI or PCI-Express depending on card revision
Power supply: Supplied through the host PC bus
Operating modes: Synchronous and asynchronous data reception depending on configuration
Maximum fiber length: Up to approximately 2000 meters depending on system setup
Software compatibility: ibaPDA, ibaAnalyzer, and related iba acquisition software
Application focus: High-speed process data acquisition and long-distance signal transmission
Functional Features
Four independent fiber-optic input channels
High-speed data reception from iba field devices
Electrical isolation through fiber-optic transmission
Strong immunity to electromagnetic interference
Long-distance data transmission capability
Automatic detection of synchronous and asynchronous modes
Integration with ibaPDA data acquisition software
Support for continuous process recording and analysis
Suitable for electrically noisy industrial environments
Compact PCI/PCIe card form factor for industrial PCs
Application Scenarios
Rolling mill process monitoring
Turbine and generator condition monitoring
Power plant data acquisition
High-voltage substation signal acquisition
Test bench and dynamometer measurements
Mechanical vibration and temperature monitoring
Steel plant automation data collection
Cement and chemical process monitoring
Research and development test systems
Long-distance signal transmission in large industrial facilities
Performance Parameters
Input channels: 4 fiber-optic inputs
Data transmission: High-speed optical data transfer
Maximum fiber distance: Up to approximately 2000 meters
Host connection: PCI or PCI-Express bus
Power consumption: Supplied by host PC bus
Latency: Low-latency optical transmission suitable for real-time acquisition
Electrical isolation: Provided by fiber-optic link
Software integration: ibaPDA and ibaAnalyzer compatible
Material Composition
Printed circuit board with PCI/PCIe edge connector
Fiber-optic receiver circuitry
Optical connector interfaces
Signal processing and buffering electronics
Bus interface controller
Metal bracket for PC chassis mounting
Protective card housing and shielding
Structural Features
Standard PCI or PCI-Express card format
Multiple fiber-optic input connectors on the rear bracket
LED indicators for link status and data activity
Compact layout for industrial PC installation
Robust mechanical bracket for secure chassis mounting
Clear labeling for ibaFOB-4i-Dexp identification
Compatible with iba acquisition server hardware platforms
Working Principle
The ibaFOB-4i-Dexp receives optical signals from iba field devices or remote acquisition units through its fiber-optic input channels. The optical signals are converted into digital data inside the card and transferred to the host PC via the PCI or PCI-Express bus. The iba acquisition software reads the incoming data streams, timestamps the measurements, and stores them for real-time monitoring, trend analysis, or offline evaluation. Because the transmission uses optical fiber, electrical noise, ground loops, and high-voltage interference are effectively isolated from the acquisition system.
Installation Requirements
Install only in compatible industrial PCs with the correct PCI or PCI-Express slot
Power down the PC before installing the card
Insert the card firmly into the slot and secure the mounting bracket
Connect fiber-optic cables to the correct input channels
Use approved fiber-optic cables and connectors for iba systems
Avoid sharp bends or contamination of fiber ends
Install ibaPDA or compatible iba software before commissioning
Verify channel status and link indicators after startup
Configure channel mapping and acquisition parameters in the iba software
Usage Precautions
Handle fiber-optic connectors with care to avoid contamination
Do not look directly into active fiber ends
Keep fiber connectors capped when not in use
Verify compatibility between ibaFOB-4i-Dexp and the installed iba software version
Avoid installing the card in non-industrial PCs with poor grounding
Monitor link status during commissioning
Replace damaged fiber cables immediately
Refer to the official IBA AG documentation for exact configuration and channel assignment
