Johnson Controls MS-NAE5510-3

Johnson Controls MS-NAE5510-3

Product Introduction MS-NAE5510-3 is a network automation engine for Johnson Controls Metasys BMS building management system. It serves as field network controller, collects data from field sensors and actuators, executes control logic, communicates with central workstation. It manages HVAC, lighting and access control in large commercial buildings, hospitals and campus facilities.

Request Quote
Category:

Description

Johnson Controls MS-NAE5510-3

Technical Specifications

  • Product type: BMS network automation controller
  • Processor: Industrial embedded processor
  • Memory: 256MB RAM, 512MB flash storage
  • Communication port: Ethernet, MS/TP bus
  • Protocol: BACnet IP, BACnet MS/TP
  • Supply voltage: DC24V
  • Operating temperature: 0 °C to +60 °C
  • Storage temperature: -40 °C to +85 °C
  • Humidity: 10% to 90%, non-condensing
  • Protection: IP20
  • Mounting: DIN rail
  • Real-time clock: Built-in RTC with backup battery

Functional Features

  • BACnet protocol network management
  • Local PID control logic execution
  • Data collection from field BACnet devices
  • Alarm event generation and uploading
  • Trend data storage locally
  • Time schedule automatic control
  • Ethernet communication to central server
  • MS/TP bus connection to field controllers
  • Web-based local diagnostic interface
  • Built-in real-time clock for scheduling

Application Scenarios

  • Commercial building HVAC control system
  • Hospital building automation system
  • University campus central BMS network
  • Shopping mall air conditioning and lighting control
  • Data center auxiliary building environmental monitoring

Materials and Construction

  • Housing: Flame retardant plastic enclosure
  • PCB: FR4 industrial circuit board
  • Terminal block: Screw copper terminals
  • Battery: Lithium backup battery for RTC
  • Ethernet connector: RJ45 metal shielded port
  • LED indicator: Status LED array

Structural Features

  • Rectangular DIN rail plastic housing
  • Front panel LED indicators for power, network and fault
  • Top and bottom screw terminals for power and MS/TP bus
  • Front RJ45 Ethernet port
  • Internal embedded circuit board
  • Rear DIN rail snap clip

Working Principle The controller runs Metasys embedded firmware. It communicates via MS/TP bus to collect temperature, humidity and valve status from field devices. It executes preset PID and schedule control logic locally. All data, alarms and trend logs transfer over Ethernet to central BMS workstation. RTC maintains accurate time for scheduled control and time stamp of events.

Installation Requirements

  • Mount on standard 35mm DIN rail inside BMS control cabinet
  • DC24V power supply with stable output
  • Use twisted pair shielded cable for MS/TP bus
  • Ethernet cable connect to building local network switch
  • Ambient temperature 0 °C to +60 °C
  • Complete network IP address and BACnet device configuration after power up
  • Cabinet grounding

Precautions

  • Replace backup lithium battery periodically
  • Do not use in environment with high humidity and condensation
  • MS/TP bus cable must follow bus termination rules
  • Set proper network firewall for BACnet IP communication
  • Store spare controller in dry anti-static packaging
  • Backup configuration before firmware upgrade

Related products