OMRON C200HW-PD024

OMRON C200HW-PD024

Product Introduction: The C200HW-PD024 is a dedicated DC power supply unit designed for the OMRON C200HW series Programmable Logic Controller (PLC). It converts an external DC voltage into the regulated internal voltages required to operate the CPU and I/O modules mounted on the backplane.

Request Quote
Category:

Description

OMRON C200HW-PD024

Technical Specifications:

  • Brand: OMRON
  • Model: C200HW-PD024
  • Product Type: DC Power Supply Unit
  • Compatible System: C200HW Series PLC
  • Input Voltage: 24 VDC
  • Input Voltage Range: 19.2 VDC to 28.8 VDC
  • Output Capacity: 4.6 A at 5 VDC (Total 30W)
  • Output Capacity (26V): 0.625 A at 26 VDC
  • Inrush Current: 30 A max.
  • Insulation Resistance: 20 MΩ min. (between DC terminals and GR terminal)
  • Dielectric Strength: 1,000 VAC for 1 minute
  • Operating Temperature: 0°C to 55°C
  • Storage Temperature: -20°C to 75°C
  • Humidity: 10% to 90% (non-condensing)

Functional Features:

  • Provides stable 5 VDC power to the C200HW backplane
  • Wide input voltage range (19.2 to 28.8 VDC)
  • Compact modular design for easy installation
  • Protection against overcurrent and short circuits
  • Designed for industrial environments with high noise immunity

Application Scenarios:

  • Industrial automation systems requiring DC power input
  • C200HW series PLC power supply
  • Manufacturing process control panels
  • Machine tool control systems

Performance Parameters:

  • Input Voltage: 24 VDC (Range: 19.2 to 28.8 VDC)
  • Output Voltage: 5 VDC
  • Output Current: 4.6 A
  • Total Output Power: 30 W

Material Composition:

  • Industrial-grade electronic components
  • Metal chassis with plastic housing
  • Screw terminal blocks for wiring

Structural Features: The unit features a modular design that mounts directly onto the C200HW backplane. It includes screw terminals for DC power input and status indicators.

Working Principle: The -PD024 utilizes a switching regulator circuit to step down the input DC voltage (24 VDC) to the required 5 VDC logic level for the PLC backplane. It isolates the input power from the internal logic circuits to ensure stability.

Installation Requirements:

  • Mount on series backplane
  • Connect DC power using screw terminals (ensure correct polarity)
  • Ensure proper grounding (GR terminal)
  • Provide adequate ventilation for heat dissipation

Usage Notes:

  • Do not connect AC power to this unit; it is strictly for DC input.
  • Verify input voltage polarity before powering on to prevent damage.
  • Ensure the total current consumption of mounted modules does not exceed the output capacity.
  • Do not perform insulation resistance tests on the unit while it is mounted on the backplane.

Related products