Description
Vibro-Meter VM600 CPUM 200-595-100-014
Technical Specifications: Part number: 200-595-100-014 Power supply: 24VDC from rack backplane Communication ports: Ethernet, serial service port, backplane internal bus Storage: Non-volatile flash memory for configuration and event logging Operating temperature: 0℃ to +60℃ Storage temperature: -20℃ to +70℃ Relative humidity: 5% to 95%, non-condensing Protection class: IP20 Mounting: Front plug-in Eurocard for VM600 ABE040 rack Supported protocols: Modbus TCP, Modbus RTU, proprietary Vibro-Meter protocol
Functional Features: Collect vibration, shaft displacement, speed and temperature measurement data from all rack modules. Store rack configuration, alarm threshold parameters and time stamped event history. Transmit real-time measurement values, spectrum data and alarm status to VibroSight host software. Serve as communication gateway to exchange data with plant DCS and SCADA platform. Execute rack-wide hardware self-diagnosis and record module fault information. Support local parameter configuration and firmware upgrade via service port. Manage time synchronization for all monitoring channels inside the rack.
Application Scenarios: Gas turbine and steam turbine condition monitoring, centrifugal compressor predictive maintenance system, large generator supervisory instrumentation, refinery rotating machinery monitoring, power plant turbo machinery data acquisition and network transmission.
Performance Parameters: High speed backplane data collection from multiple measurement cards simultaneously. Large capacity non-volatile storage for event and trend records. High precision time stamping for all alarm and measurement events. Stable continuous network data transmission for 24 hours uninterrupted operation. Fast response to alarm events from protection modules.
Material Composition: High grade FR4 high-speed printed circuit board. Industrial 32-bit microprocessor chip. Flash memory and RAM memory chips. Ethernet and serial communication transceivers. Flame retardant metal front panel with status LED indicators. Gold plated edge connector for rack backplane connection.
Structural Features: Standard Eurocard plug-in module for front rack slot. Front panel fitted with LED indicators for power, run, fault and network status. Front panel equipped with RJ45 Ethernet port and local service serial port. Edge connector connects to rack backplane for power and internal bus communication. Internal metal shielding reduces EMC interference in industrial cabinet. Front panel extraction handle for convenient module hot swap maintenance.
Working Principle: 24VDC power supplies the CPUM module from rack backplane. The processor loads saved configuration data from flash memory after power on. CPUM communicates with all front measurement and protection cards through rack backplane bus, acquires real-time measurement values and alarm status. It packages data and transmits measurement, spectrum and alarm information to VibroSight workstation or DCS via Ethernet. When any module detects abnormal machinery status, CPUM captures alarm events, adds time stamp and saves events into onboard non-volatile memory. Service port supports local connection for parameter backup, restoration and firmware update.
Installation Requirements: Insert CPUM module to designated front slot of ABE040 VM600 rack. Connect Ethernet cable from front panel port to plant monitoring network. Use shielded Ethernet cable for long distance network wiring. Install rack inside ventilated IP20 electrical cabinet. Complete protective earth connection for rack chassis. Verify backplane bus contact after module insertion.
Usage Notes: Backup full rack configuration before firmware upgrade or module replacement. Implement ESD protection before handling the module. Cut rack power supply before removing CPUM module if hot swap is not supported. Check network communication status LED after power on. Do not expose gold plated edge connector surface to direct touch or contamination.
