GE PCIE-5565PIORC-10000

GE PCIE-5565PIORC-10000

Product Introduction PCIE-5565PIORC-10000 is a reflective memory card from GE Intelligent Platforms (now Abaco) in PCI Express form. The card enables high-speed shared memory data exchange between real-time distributed nodes with sub-microsecond transfer delay and no software protocol overhead. Used in hardware-in-the-loop simulation, distributed control, and semi-physical test systems.

Request Quote
Category:

Description

GE PCIE-5565PIORC-10000

Technical Specifications

  • Product type: PCIe reflective memory card
  • Bus: PCI Express x1
  • Fiber rate: 2.125 Gbps
  • Nodes: Up to 256
  • Memory size: 128 MB
  • Transfer latency: < 500 ns
  • Fiber interface: Multimode/single-mode
  • Supply: PCIe slot
  • Operating temperature: 0 °C to +70 °C
  • Storage temperature: -40 °C to +85 °C
  • Humidity: 5 % to 95 %, non-condensing
  • Installation: PCIe slot
  • Redundancy: Ring/star

Functional Features

  • Real-time reflective memory sharing
  • Sub-microsecond inter-node transfer
  • Up to 256 nodes
  • 128 MB shared memory
  • Fiber ring redundancy
  • Hardware broadcast with no software overhead
  • Interrupt trigger event notification
  • Multiple OS drivers
  • High-reliability real-time communication
  • Test simulation

Application Scenarios

  • Hardware-in-the-loop multi-node
  • Distributed real-time control
  • Flight vehicle simulation
  • Power system real-time simulation
  • Train control simulation test

Materials and Construction

  • PCB: FR4 board
  • Core: RFM controller chip, optical module
  • Connectors: PCIe gold fingers, LC fiber port
  • Passive components: Resistors, capacitors
  • Metal bracket

Structural Features

  • Standard PCIe half-height card
  • Front panel LC fiber port
  • Internal RFM controller, optical module, memory
  • PCIe gold fingers
  • Metal bracket
  • Fanless

Working Principle Each node maps a local 128 MB memory to a global address space. Writes to local memory are automatically broadcast in hardware to corresponding memory on all other nodes in <500 ns. The fiber ring connects all nodes; node faults are automatically bypassed. Interrupts notify data arrival.

Installation Requirements

  • With PC power off, insert into PCIe slot
  • Clean LC fiber ends
  • Close fiber ring into a loop
  • Grounding
  • Temperature 0 °C to +70 °C
  • Install driver and set node ID after power-up
  • Sufficient fiber bend radius

Precautions

  • Never touch fiber end faces
  • Ring must be closed loop
  • Node IDs must be unique
  • Store spares in dust-proof packaging
  • Wear ESD wrist strap
  • Cap fiber connectors

Related products