GE 8507-BI-DP 8507-BI-DP-01

GE 8507-BI-DP 8507-BI-DP-01

Product Overview The GE 8507-BI-DP and 8507-BI-DP-01 are high-performance Bus Interface Modules (BIM) from the GE PAC8000 series (originally MTL Instruments, now part of Eaton). These modules serve as the critical communication bridge between PAC8000 series I/O modules and PROFIBUS-DP master stations, enabling seamless high-speed data transfer in industrial automation systems.

Request Quote
Category:

Description

GE 8507-BI-DP 8507-BI-DP-01 Technical Specifications

Parameter Value
Manufacturer GE (PAC8000 Series) / MTL Instruments (Eaton)
Product Type PROFIBUS DP Bus Interface Module (BIM)
Communication Protocol PROFIBUS DP-V0/V1
Maximum Data Transfer Rate 12 Mbps
Supported I/O Modules Up to 24 I/O modules
Input Voltage 24 VDC (from carrier)
Typical Power Draw 2.5 W
Operating Temperature -40°C to +70°C (some sources indicate +85°C)
Storage Temperature -40°C to +85°C
Protection Class IP20 (base), IP67 (with appropriate enclosure)
Dimensions 25 mm × 100 mm × 120 mm
Weight 0.35 kg to 0.5 kg
Mounting DIN Rail / Rack (via 8701-CA-BI Redundant BIM Carrier)
Interface/Bus PROFIBUS DP (DB9) / Carrier Bus
HART Support HART Pass-Through enabled
Compliance CE, ATEX (Zone 2), EN 50159

Key Features

  • High-Speed Communication: Supports PROFIBUS network speeds up to 12 Mbaud for real-time data acquisition and control

  • Extended Diagnostics: Comprehensive module and channel status diagnostics for rapid fault identification

  • HART Pass-Through: Supports monitoring and configuration of HART devices over the PROFIBUS network

  • Redundant Operation: Supports redundant BIM configurations for critical applications with continuous health monitoring

  • Non-Volatile Memory: Stores configuration data to prevent loss during power cycles

  • Flexible Configuration: Can be parameterized via PROFIBUS host using GSD file

  • IP Address Configuration: Supports configuration and reset of IP addresses for network management

  • Electrical Isolation: Provides isolation between input and output signals for enhanced safety and noise immunity

System Integration

  • Must be used with the 8701-CA-BI Redundant BIM Carrier for proper mounting
  • Redundant pairs operate in parallel with continuous status checking
  • Backup BIM monitors primary BIM health for automatic failover
  • Configuration created in PROFIBUS configurator using provided GSD file

Applications

  • Chemical processing and batch reactor control
  • Oil and gas remote ESD panels and wellhead monitoring
  • Water treatment and pump station interlocks
  • Pharmaceutical manufacturing
  • Food and beverage production lines
  • Power distribution and substation automation
  • Mining and mineral processing

Related products